■製品仕様  メーカーリンク

---

 

140mmファン穴に取付け可能なフラットタイプのポンプリザーバー
3pin 5V デジタル(アドレッサブル)RGB LED搭載
PWM制御可能なD5ポンプ一体型

 

前シリーズ(Kinetic FLT)からの改良点：

・G1/4接続口の増加

・フロントマウントポンプ

・設置時の柔軟性を高める側面と背面の取り付け穴

・冷却液がチャネル間から漏れるのを防ぎ、流れを改善するカスタム成形のOリング
・高密度LEDストリップの実装
・LEDストリップの交換時に扱いやすい独立したカバー

揚程：5.2m　流量：1000L/h　消費電力：20W

サイズ (HxWxT)：278.5x148x86mm [280サイズ]
容量：~445ml
接続口：G1/4 x8

電源供給はSATA電源にて行います。
4ピンコネクタ(PWM)をマザーボード等に接続すると回転数を制御出来ます。

ご注意事項：
・RGBケーブルは、必ず3pin 5V デジタル(アドレッサブル)RGB コネクタに接続して下さい
　12V 4pin RGBコネクタに接続すると故障しますのでご注意下さい
・空回し禁止
　必ず水が流れる状態で稼働させてください。

メーカー保証: 2年

Details

 

This next-generation EK-Quantum Kinetic³ FLT D5 pump-reservoir combo unit builds on the success of the existing FLT, flat-style combo unit and further improves compatibility, and simplifies the installation process by moving the pump to the front side and implementing additional G1/4“ connection ports.

 

It comes with sophisticated addressable D-RGB lighting and a genuine D5 pump!

 

The unit features standard 140mm fan mounting holes for maximum flexibility during the installation. The reservoir is equipped with a total of eight G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.

 

EK-Quantum Kinetic³ FLT D5 series pump-reservoir units are equipped with genuine D5 pumps, made in Europe, which are capable of delivering flow rates of 1000 liters per hour with a maximum head pressure of up to 5.2 meters! These new FLT series combo units are available in six different sizes 92mm, 120mm, 240mm, 140mm, 280, and 360mm.
 

The new Kinetic³ flat-shaped pump-reservoir units are to revolutionize the way you were thinking about combo units and loop building. Since 140mm fan mounting patterns (125mm apart) are the most dominant mounting options inside PC cases these days, these new Kinetic FLT D5 combo units will allow greater flexibility for installation since they don't require drilling of mounting holes on your case. The combo unit is also equipped with additional mounting points on both sides (125mm apart) which can be used with the included steel L-shaped mounting plates. All mounting holes utilize M4 threads with the included screws.

 

The reservoir is manufactured of premium quality acrylic material, and machined to perfection, while the sealing is performed by a custom-formed high-quality EPDM o-ring. Alongside the reservoir is a black anodized aluminum cover under which the Addressable D-RGB LED strip is placed. Proper LED implementation is one of the main focus points of EK so that there are as few visible "LED hotspots" as possible. The cover is now a standalone piece, easily removable at any time if the LED strip requires any service or replacement.